Navilock NL-82004P MD6 Seriell Multi GNSS UDR Empfänger u-blox NEO-M8U 5 m
Tételszám 62665
Áttekintés
Leírás
The MD6 serial multi GNSS UDR receiver by Navilock based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-82004P GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit into the vehicle concept, due to its design.Megjegyzés
The manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver! Műszaki adatok
- Connector: MD6 Navilock plug (RS-232) (USB or serial cable are optional available)
- Chipset: u-blox NEO-M8U
- Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0.5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
- Accepts the signals of up to 72 satellites at the same time
- Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
- Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
- Supports UDR from NMEA 4.1
- Auto Baud Rate up to 115200 bps
- PPS signal on pin 6 (LVTTL 3,3 V)
- Update rate: up to 20 Hz
- Sensibility max. -160 dBm
- IPX7 protection class
- Operating temperature: -20 °C ~ 60 °C
- Power supply: 5 - 48 V DC
- Current consumption: max. 45 mA
- Cold start in ca. 26 seconds
- Hot start in ca. 1 second
- Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
- Cable length: ca. 5 m
- Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
- Profit from Windows applications (e.g. weather, maps, etc)
- Supporting the GNSS location platform API (32 bit)
Rendszerkövetelmények
- Windows Vista/7/8/8.1/10, Linux Kernel 2.6, Mac OS X
- MD6 connection cable
A csomag tartalma
- MD6 serial receiver
- Mounting material: stainless steel nut and washer
- Navilock support CD incl. driver and user manual
Csomag
- Retail Box
Műszaki adatok
Általános
Védelmi besorolás
- IPX7
Kültéri használatra alkalmas
- Igen
Csatolófelület
Csatlakozó
- 1x MD6 serial
Technikai tulajdonságok
Működési feszültség
- 5 - 48 V DC
Lapkakészlet
- u-blox NEO-M8U
Frekvenciatartomány
- BEIDOU: B1, 1561.0980 MHz
- GALILEO: L1 1575,4200 MHz
- GLONASS: G1, 1.6025625 - 1.6155000 GHz
- GPS: L1, 1,5754200 GHz
Működési hőmérséklet
- -20 °C ~ 60 °C
Jelenlegi fogyasztás
- 45 mA
Érzékenység
- -160 dBm
Frissítési frekvencia
- max. 20 Hz
Fizikai jellemzők
Borítás szín
- fekete
Kábel színe
- fekete
Kábelhosszúság a csatlakozóval együtt
- 5 m
Átmérő
- 62 mm
Hosszúság
- 65 mm
Magasság
- 21 mm
Dokumentumok
Lehetséges kiegészítők
-
Navilock Csatlakozókábel, MD6 soros > D-SUB 9 soros GNSS vevőegységhez USB-n keresztül történő tápellátássalTételszám: 62907
-
Navilock Connection Cable MD6 Serial > D-SUB 9 Serial For GNSS ReceiverTételszám: 61265
-
Navilock Connection cable MD6 > USB for GNSS ReceiverTételszám: 61264
-
Navilock NL-8005P MD6 Serial Multi GNSS Receiver u-blox 8 5 mTételszám: 62526
-
Navilock NL-8004P MD6 Serial PPS Multi GNSS Receiver u-blox 8 5 mTételszám: 62527
-
Navilock NL-8044P MD6 soros töbszörös GNSS vevőegység u-blox 8 10 mTételszám: 62528
-
Navilock NL-8022MP MD6 Serial PPS Multi GNSS Receiver u-blox 8 5 mTételszám: 62529
-
Navilock NL-8222MP MD6 Serial PPS Multi GNSS Receiver u-blox 8 10 mTételszám: 62530
Az itt megemlített nevek és szimbólumok a megfelelő gyártók tulajdonát képezik (a változtatások, nyomtatási hibák és egyéb hibák kivételt jelentenek).