Navilock Receptor multi-GNSS LVTTL TRRS con conector estéreo NL-8008T u-blox 8
Descripción
El receptor multi-GNSS LVTTL con conector estéreo de 4 contactos basado en el conjunto de chips u-blox 8 tiene una antena integrada que proporciona una alta sensibilidad.
Especificación técnica
- Conector: macho estéreo de 4 contactos y 3,5 mm LVTTL TRRS
- Conjunto de chips u-blox 8 UBX-M8030-KT
- Frecuencia:
GPS: L1, 1575,4200 MHz
GLONASS: L1, 1602 (k x 0,5625) MHz
BEIDOU COMPASS: B1, 1561,0980 MHz
GALILEO E1, 1575,4200 MHz
QZSS L1, 1575,4200 MHz - Acepta las señales de hasta 72 satélites en el mismo tiempo
- Admite AssistNow en línea y fuera de línea,
SBAS (WAAS, EGNOS, QZSS y MSAS) - Ayudas NMEA 0183 Protocoles: GGA, GSA, GSV, RMC, VTG
- Auto Baud Rate de hasta 115200 bps
- Tasa de actualización:
GNSS único: 18 Hz (por ejemplo GPS solo)
Multi-GNSS: 10 Hz (por ejemplo GPS+GLONASS) - Sensibilidad máx. –167 dBm
- Clase de protección IPX6
- Magnatic, antideslizante en el fondo
- GPS LED- estado-indicador
- Temperatura de funcionamiento: -20 °C ~ +60 °C
- Arranque en frio adentro alrededor 26 sec.
- Comienzo caliente adentro alrededor 1 sec.
- Precisión de posicionamiento: CEP (Circular Error Probable, es decir,
Probabilidad de error circular) de 2,5 m y CEP de 2 m con SBAS - Longitud del cable: aprox. 1,5 m
- Dimensiones (LAxANxAL): aprox. 65 x 45 x 22 mm
Requisitos del sistema
- Windows Vista/7/8, Linux Kernel 2.6
- Un puerto estéreo disponible de 3,5 mm
Contenido del paquete
- Receptor LVTTL
- Driver en CD
- Manual de usuario en CD-ROM
Paquete
- Retail Box
15.02.2023
Datenblatt
15.02.2023
Data sheet
15.02.2023
Feuille de données
15.02.2023
Hoja de datos
15.02.2023
CE - Declaration of conformity
248.3 kB
21.03.2016
User Manual (English)
578.01 kB
21.03.2016
User Manual (German)
576.47 kB
Software
20.04.2016
Eine leistungsstarke Software für die Analyse, Konfiguration, Entwicklung unserer GNSS ublox-Module und Empfänger.
11.79 MB
Software
05.03.2018
02.03.2017
11.79 MB
Eine leistungsstarke Software für die Analyse, Konfiguration, Entwicklung unserer GNSS ublox-Module und Empfänger.
20.86 MB
Galileo (satellite navigation)
The European navigation system Galileo will start probably at the end of 2016 and will become full operational capability (FOC) in 2020. Our Navilock u-blox 8 receivers support Galileo since the firmware version 3.01.
The new GNSS system requires the version 4.1 of the NMEA 0183 protocol. The evaluation software uCenter displays the Galileo satellites.
Please notice the instruction for this update.
The new GNSS system requires the version 4.1 of the NMEA 0183 protocol. The evaluation software uCenter displays the Galileo satellites.
Please notice the instruction for this update.