Navilock NL-8022MP MD6 Serial PPS Multi GNSS Receiver u-blox 8 5 m
Predmet br. 62529
Pregled
Opis
The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-8022MP GNSS receiver is especially designed for installation on a white ground (boat, camper, bus etc.) It is unremarkable and fits into the vehicle concept due to its housing design.Tehnički podaci
- Connector: MD6 Navilock plug (RS-232) (USB or serial cable are optional available)
- Chipset: u-blox 8 UBX-M8030-KT
- Frequency:
GPS: L1, 1575.4200 MHz
GLONASS: L1, 1602 (k x 0,5625) MHz
BEIDOU COMPASS: B1, 1561.0980 MHz
GALILEO: E1, 1575.4200 MHz
QZSS: L1, 1575.4200 MHz
- Accepts the signals of up to 72 satellites at the same time
- Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
- Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
- Auto Baud Rate up to 115200 bps
- PPS signal on pin 6 (LVTTL 3.3 V)
- Update rate:
single GNSS: 18 Hz (e.g. GPS solo)
multi GNSS: 10 Hz (e.g. GPS+GLONASS)
- Sensibility max. -167 dBm
- IPX7 protection class
- Operating temperature: -20 °C ~ 60 °C
- Power supply: 5 V DC
- Current consumption: max. 45 mA
- Cold start in ca. 26 seconds
- Hot start in ca. 1 second
- Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
- Cable length: ca. 5 m
- Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm
Microsoft Sensor and Location Platform (Website)
- Profit from Windows applications (e.g. weather, maps, etc)
- Supporting the GNSS location platform API (32 bit)
Preduvjeti sustava
- Windows Vista/7/8/8.1/10, Linux Kernel 2.6, Mac OS X
- MD6 connection cable
Sadržaj pakiranja
- MD6 serial receiver
- Mounting material: stainless steel nut and washer
- Navilock support CD incl. driver and user manual
Pakiranje
- Retail Box
Dokumenti
Software
Software
20.04.2016
11.79 MB
Eine leistungsstarke Software für die Analyse, Konfiguration, Entwicklung unserer GNSS ublox-Module und Empfänger.
Software
05.03.2018
20.86 MB
02.03.2017
11.79 MB
Eine leistungsstarke Software für die Analyse, Konfiguration, Entwicklung unserer GNSS ublox-Module und Empfänger.
Često postavljana pitanja
Galileo (satellite navigation)
The European navigation system Galileo will start probably at the end of 2016 and will become full operational capability (FOC) in 2020. Our Navilock u-blox 8 receivers support Galileo since the firmware version 3.01.
The new GNSS system requires the version 4.1 of the NMEA 0183 protocol. The evaluation software uCenter displays the Galileo satellites.
Please notice the instruction for this update.
Option PPS (Pulse Per Second)
The Pulse-Per-Second (PPS) signal is available on the mini DIN connector at PIN 6. It is synchronized with UTC time. A flexible power supply for PPS provides the integrated Darlington circuit and a pull-up resistor of 10 KOhm.
Opcijski pribor
-
Delock Montažna šipka za antenuPredmet br.: 12702
-
Navilock Kabel za povezivanje MD6 serijski > D-SUB 9 serijski za GNSS prijemnik s izvorom napajanja putem USB-aPredmet br.: 62907
-
Navilock Connection Cable MD6 Serial > D-SUB 9 Serial For GNSS ReceiverPredmet br.: 61265
-
Navilock Connection cable MD6 > USB for GNSS ReceiverPredmet br.: 61264
-
Navilock NL-8005P MD6 Serial Multi GNSS Receiver u-blox 8 5 mPredmet br.: 62526
-
Navilock NL-8004P MD6 Serial PPS Multi GNSS Receiver u-blox 8 5 mPredmet br.: 62527
-
Navilock NL-8044P MD6 serijski Multi GNSS prijamnik u-blox 8 10 mPredmet br.: 62528
Svi ovdje spomenuti nazivi i simboli vlasništvo su odgovarajućih proizvođača. Greške u tisku,promjene i greške se izuzimaju.